Kids toy storage joinery Dubai: cost and safe design (2026)
Built-in kids toy storage joinery in Dubai starts around AED 900 for a single open cubby unit and reaches AED 14,000 for a full playroom wall system, with most family projects landing between AED 4,000 and AED 9,000.
Noor al Sundus builds kids joinery only, not kitchens and not general fit-out. That focus shows up in the sizing, the anchoring and the finishes, all chosen for a small child's bedroom. For the wider range we build, see our page on custom kids joinery in Dubai.
Why work with Noor al Sundus
- Kids joinery specialists, not general fit-out
- Google rating 5.0 from 8 reviews
- In-house design, production and installation team
- Projects completed in Palm Jumeirah, JVC and Dubai
- Fixed written quote before production starts
- E0 and E1 low-VOC boards and child-safe hardware as standard
What custom toy storage joinery includes
Most kids rooms need three things in one system: open storage a child can reach, closed storage for volume, and storage tucked into furniture the room already has. Toy storage is usually the first piece families fix inside a bigger kids playroom joinery in Dubai project.
Pull-out bins and drawers
Deep drawers on full-extension runners take Lego, soft toys and dress-up clothes out of sight in one movement. In a Dubai playroom we build bins 400 to 500 mm deep and 600 mm wide. Past 500 mm, toys vanish to the back and the drawer gets too heavy for a child to pull.
Low open cubbies for toddlers
Cubbies topped at 250 to 350 mm let a two or three year old put things back without an adult. The rule we work to: if a child cannot take it out and return it in one motion, that is adult storage, not child storage.
Wardrobe-integrated and under-bed storage
In a Dubai apartment the bedroom is the playroom. A custom kids wardrobe Dubai build can carry a 400 mm toy column beside the hanging run, and under-bed drawers use the dead space below a single bed. Where a desk is going in anyway, kids study nook Dubai joinery runs the same logic with drawers below and a shelf above.
kids toy storage joinery with warm LED lighting and light wood and dark marble panels, photographed during a Dubai fit-out" loading="lazy" decoding="async" />
Warm LED lighting and a light wood and dark marble mix, shot mid-install before the protective sheeting came up.
What it costs in Dubai
Figures below are supply and installation with standard low-VOC board and soft-close hardware. Palm Jumeirah villa work and JVC apartment work sit in the same bands. Access, floor protection and how much wall gets covered are what move a quote up or down.
| Item | Typical range (AED) |
|---|---|
| Built-in unit, per running metre | 1,200 to 2,200 |
| Full playroom wall system | 6,500 to 14,000 |
| Under-bed drawer set | 1,800 to 3,500 |
| Single open cubby unit | 900 to 1,800 |
Three things drive the number: board, hardware and finish. E0 or E1 low-VOC MDF is our base. Birch ply costs more but takes repeated knocks and looks better under a clear finish. Soft-close runners and hinges add roughly 10 to 15 per cent, and sprayed lacquer in a custom colour costs more than a laminate face.
Child-safe specs that matter
Safety in kids joinery is a set of measurable details, not a line in a brochure. Four of them do most of the work.
Anti-tip wall anchoring
Every unit over 600 mm tall is fixed into block or stud with expansion anchors, never into plasterboard alone. A 700 mm wide bookcase is climbable, and anchoring is the line item that decides whether it stays standing.
Rounded edges and soft-close
Exposed edges get a 2 mm radius: crisp enough to read as a clean detail, soft enough not to cut. Drawers and doors run soft-close so nothing can slam on a hand.
Finger-safe gaps
Any gap between 8 mm and 25 mm is either closed or opened up. That band is where small fingers and hands get trapped, so we keep clearances under 8 mm or over 25 mm across the whole unit.
Low-VOC finishes
E0 and E1 boards with water-based lacquer or low-emission laminate. A child's bedroom is small and often closed up with the AC running, so finish choice matters more there than anywhere else at home.
Glass partitions and built joinery in a Dubai office, produced in the same workshop as our kids storage.
Sizes for Dubai apartments and villas
Nearly every kids room in Dubai fits one of three footprints, and the storage plan follows from there.
- Apartment second bedroom, about 3.0 x 3.5 m: one wall run of 2.4 to 3.0 m plus under-bed drawers.
- Apartment third bedroom, about 2.8 x 3.0 m: wardrobe-integrated storage, no separate toy wall.
- Villa kids room, 4.0 x 4.5 m and above: full playroom wall plus a low reading corner.
Heights then follow the child:
- 1 to 3 years: cubbies topped at 600 mm, everything reachable while standing.
- 4 to 7 years: 900 to 1,200 mm, open shelves with one closed drawer bank.
- 8 to 12 years: 1,800 to 2,400 mm, storage moves up and desk space arrives.
Design tips so storage keeps working as kids grow
Plan for a nine year old, not only a three year old. Bins stay low, shelves stay adjustable, and tall units keep their anchors.
- Label bins with pictures for pre-readers and words for early readers.
- Keep the two heaviest bins at floor level where a child can slide them.
- Use adjustable shelf pins so a toy shelf can become a display shelf later.
- Leave one empty bay on purpose. Children fill the space you give them.
Lead time and process in Dubai
From approved drawings, production takes three to four weeks and installation is one to two days on site. The sequence runs like this.
- Send room photos and rough measurements on WhatsApp to +971 55 379 6441.
- Free design call, board and finish selection, fixed written quote.
- Site measure at your Dubai address, final drawing approved.
- Production in the workshop over three to four weeks.
- Installation, wall anchoring, handover and clean up.
Owners tend to notice the same things we care about on site.
Highly Recommended – Trustworthy, Hardworking & Complete Fit-Out Team Munawwar Ali Khan, 5 out of 5
A free website draft for contractors
I work with many contractors in Dubai, and plenty of them still have no website at all, let alone a professional Instagram. That is why 2 slots are open this week for a free website draft. First come, first served. Register your interest on apply.improovy.ae.
Frequently asked questions
How much does kids toy storage joinery cost in Dubai?
A single open cubby unit runs AED 900 to 1,800, under-bed drawers AED 1,800 to 3,500, and a full playroom wall system AED 6,500 to 14,000. Built-in runs are quoted per running metre, usually AED 1,200 to 2,200 including board, hardware and installation. A fixed written quote follows the site measure.
How long does custom toy storage take in Dubai?
Design and quoting take about a week, production three to four weeks, and installation one to two days. That works out at roughly six to seven weeks from first message to finished room. Palm Jumeirah villa jobs with building management approvals can add a few days for permits and lift bookings.
Is built-in toy storage safe for toddlers?
Yes, when the unit is anchored into block or stud, edges are rounded to a 2 mm radius, heavy drawers run on soft-close runners, and gaps stay under 8 mm or over 25 mm. We fix every unit over 600 mm tall to the wall as standard. Low-VOC E0 and E1 boards keep the air cleaner in a small closed bedroom.
Can toy storage be added to an existing wardrobe?
Usually yes. A 400 mm deep toy column can go beside the hanging run, or open cubbies added below a shelf, without replacing the whole wardrobe. If the existing carcass is chipboard or the doors have warped, we may suggest a new run instead, and we will say so in the quote.
Do you cover Dubai villas and apartments?
Yes, we work across Dubai, with completed kids joinery in Palm Jumeirah, JVC and other Dubai communities. Villas and apartments are handled by the same in-house team, from design through to installation. Send room photos on WhatsApp to +971 55 379 6441 for a first estimate.
