Kids room joinery cost Dubai: 2026 AED price guide
A custom kids wardrobe in Dubai costs around AED 1,300 to AED 2,400 per linear metre in 2026, and a complete kids room in bespoke joinery usually lands between AED 14,000 and AED 65,000. This guide breaks that number down unit by unit so you can check a quote line by line before paying a deposit.
Why work with Noor al Sundus
- Kids joinery only, handled as one scope from design to fitting
- Own workshop in Dubai with an in-house carpentry team
- Fixed price quotes backed by an itemised BOQ before any deposit
- Google rating of 5 from 8 reviews
- Palm Jumeirah, JVC and Dubai wide coverage
- Written warranty, 24 months on carcass and 12 months on hardware
What a kids room joinery quote actually covers in Dubai
A kids joinery quote should cover design, board, hardware, fixing and fitting, not board and saw time alone. Every line you pay for needs to be in writing.
- Site survey and final wall measurement
- Layout drawing and 3D visuals with one revision round
- Carcass board, doors, back panels and shelves
- Edge banding and radiused front edges
- Hinges, runners, handles and soft-close mechanisms
- Wall anchors and anti-tip brackets
- Delivery, assembly, silicone and the snag visit
- Warranty terms with start and end dates
If the document is one line reading wardrobe as per site, ask for the full breakdown. On a 2.4m run, the gap between two Dubai quotations is nearly always board grade and hardware, never carpentry hours. Our custom kids joinery in Dubai service page shows what each scope package includes.
Wardrobes: price per linear metre in Dubai
Wardrobes are priced by running metre of width at a standard 2.4m height. Hinged doors cost less than sliding doors because the aluminium track and frame are the expensive parts.
| Specification | Rate per linear metre, 2026 |
|---|---|
| Hinged, melamine faced board, standard hardware | AED 1,300 to AED 1,750 |
| Hinged, E0 board, soft-close hinges | AED 1,750 to AED 2,200 |
| Sliding, aluminium track, soft-close | AED 1,900 to AED 2,400 |
| Sliding with mirror panel or lacquered front | AED 2,400 to AED 2,900 |
A 2.0m hinged wardrobe for a JVC apartment bedroom breaks down like this:
- 2.0 linear metres at AED 1,650 = AED 3,300
- Three soft-close drawers at AED 320 each = AED 960
- One full height mirror door = AED 700
- Anti-tip wall fixing and anchor = AED 350
- Fitted total = AED 5,310
The same wardrobe with sliding doors lands near AED 6,100, because the track alone adds AED 500 to AED 900 depending on span. Any opening above 1.8m should be sliding or split into two banks, since a single 2.4m hinged door twists in Dubai humidity within about two years.
I would like to share my very positive experience with Noor Al Sundus Contracting following the completion of a major renovation and fit-out of our home. Munawwar Ali Khan, 5 out of 5
Beds and bunks for kids rooms in Dubai
Bespoke bed pricing depends on how many functions you fit under the mattress.
- Single bed with two under-bed drawers, AED 3,500 to AED 5,500
- Bunk bed with a fixed ladder, AED 6,500 to AED 9,000
- Bunk bed with storage stairs, AED 7,500 to AED 11,000
- Loft bed with desk and shelving below, AED 9,000 to AED 14,000
Safety engineering is the part cheap quotes skip. Guard rails sit 900mm above the mattress top with gaps no wider than 90mm, bed rails use 25mm board, and every frame is anchored to a stud or to a chemical anchor in a concrete wall at AED 250 to AED 450 per bed. Storage stairs add AED 1,200 to AED 1,800 and give you a full soft-close drawer on each step.
Study desks, bookshelves and toy storage
Small units are where kids joinery price Dubai comparisons get confusing, because rates appear per metre, per unit or per shelf.
- Wall-mounted desk, 1.2m with grommet and cable channel, AED 2,200 to AED 3,200
- Two pedestal drawers under a desk, add AED 900 to AED 1,400
- Cable management upgrade with trunking and under-desk tray, AED 250 to AED 400
- Bookshelves, AED 900 to AED 1,400 per linear metre
- Kids toy storage joinery, open cubbies at AED 700 to AED 1,100 per linear metre
- Nine box cubby unit, 1.8m wide, AED 2,400 to AED 3,200
In a Palm Jumeirah villa with 3.2m ceilings, full height shelving on the same wall as the desk adds 10 to 15 percent because of the extra board and the ladder work. In a standard JVC apartment with 2.7m ceilings, a 2.4m wardrobe run plus a desk and a cubby bank comes in around AED 14,500 fitted. Board options are explained in our more kids joinery guides.
Institutional joinery at scale: tiered desks, panelled walls and an integrated LED ceiling, fabricated and fitted by our own Dubai team.
What pushes the kids joinery price up
- Soft-close hinges at AED 45 to AED 90 each against AED 8 for a basic hinge
- Anti-tip wall fixings, AED 300 to AED 600 for a standard room
- E0 or E1 low emission board, 15 to 20 percent more than standard particleboard
- Radiused edges on every front and shelf, AED 25 to AED 40 per linear metre
- Curved fronts, angled corners and non 90 degree walls, a 20 to 35 percent uplift
- Ceiling heights above 2.8m, bulkheads and AC ducting the unit has to work around
Licensed Dubai joinery workshop or freelance carpenter
A licensed workshop carries a DET trade licence, contractor insurance and a written warranty. A freelance carpenter at AED 400 to AED 700 a day carries none of them, and the saving looks real until a bunk bed needs a replacement runner or a wardrobe starts to pull away from the wall.
Insurance matters more than most parents expect. If a fitter is injured in your home, or a unit falls because the anchoring was rushed, an unlicensed operator leaves you holding the cost. Ask for the trade licence number and the warranty period in writing, and check whether fitting is done by the company's own team or subcontracted on the day.
Their team was professional, responsive, and cooperative throughout the project. The quality of the fit-out and joinery work was very good. anil kumar, 5 out of 5
kids wardrobe cost Dubai guide." loading="lazy" decoding="async" /> Commercial counters and timber panelling cut and finished to millimetre tolerances before site delivery.
Three ways to cut cost without cutting safety
- Change the finish, not the carcass. Melamine faced board at AED 380 to AED 480 per sheet replaces lacquer and saves 20 to 30 percent, while the 18mm structure and the fixings stay identical.
- Lock the 600mm module. Doors, drawers and cubbies at standard widths reuse one cutting program, and every non standard width adds board waste you pay for.
- Phase the room. Build the wardrobe and the bed this year, then add the desk, shelving and toy storage later. Unit rates stay inside the signed BOQ and you avoid one large payment.
Never trade away anti-tip fixings, soft-close runners or board grade to hit a budget. Those three items are the reason custom kids room furniture Dubai costs more than a flat pack, and they are the parts that fail first.
How a fixed price quote is built
- Site survey, 45 to 60 minutes. Walls, floor level, skirting, door swing, AC bulkheads and power points are measured and photographed.
- Design, 2 to 3 working days. A layout, a 3D visual and a material board go out for approval.
- BOQ, unit by unit. Every wardrobe, bed, desk and shelf is listed with its own rate, hardware and quantity.
- Fixed AED figure, valid 14 days, with payment split 50 percent advance, 40 percent on delivery and 10 percent after snagging.
- Production, 7 to 10 working days for melamine and laminate, 3 to 4 weeks for lacquer or curved work.
- Fitting and snag visit, 1 to 3 days on site, with the warranty certificate issued at handover.
You can request a kids room joinery quote with your room dimensions and get an itemised figure back within a week. To judge the finish first, see our kids joinery projects and compare the detail work.
Frequently asked questions
How much does a custom kids wardrobe cost in Dubai?
Expect AED 1,300 to AED 2,400 per linear metre for a 2.4m high unit in 2026. A 2.0m hinged wardrobe with three drawers, a mirror door and anti-tip fixings works out at about AED 5,300 fitted, and the same span in sliding doors is closer to AED 6,100.
Is custom kids joinery more expensive than IKEA?
Up front it is. A 2m IKEA PAX combination with drawers costs about AED 2,500 to AED 4,000 and you assemble it yourself. Custom starts near AED 4,500 fitted for the same span, but it is cut to your wall, uses E0 board, includes anti-tip anchoring and can be repaired instead of replaced.
How long does kids room joinery take in Dubai?
Standard melamine and laminate work runs 7 to 10 working days in production plus 1 to 2 days of fitting. Lacquered, curved or hand-finished units need 3 to 4 weeks because the spray coats cure between passes.
Do I need a permit for kids room joinery in Dubai?
No DET or Dubai Municipality permit is needed for freestanding or wall-mounted furniture inside your own home. Permits apply to structural changes, partitions and MEP work. In a Palm Jumeirah villa or a rented apartment you may still need a landlord or developer NOC before drilling into walls.
Which board is safest for a child's bedroom?
E0 or E1 low formaldehyde board is the safe default and adds roughly 15 to 20 percent to board cost. In Dubai humidity, moisture resistant MDF or plywood holds its shape better than standard particleboard behind a wardrobe or under a bed.
Can you match joinery to furniture we already own?
Yes. Bring a drawer front or a clear photo and we match laminate, lacquer sheen or veneer against physical samples before production. Colour matching in 3D renders is not reliable, so approval happens on a real sample board.
