Custom kids wardrobe Dubai: 2026 cost, safety and size guide
A custom kids wardrobe in Dubai costs from AED 2,800 for a small reach-in unit and AED 5,500 to 9,000 for a full-height build, including child-safe hardware and boards suited to Dubai humidity. This guide covers 2026 price bands, the safety details worth paying for, and how sizing works in apartments and villas.
Why work with Noor al Sundus
- Kids joinery only, from design to install
- Premium custom designs, never resold flat-pack
- DET-licensed contractor using Dubai Municipality-compliant materials
- Fixed price agreed before fabrication starts
- Serving Palm Jumeirah, JVC and Dubai
- Google rating 5.0 from 8 reviews
What a custom kids wardrobe includes that flat-pack does not
A custom wardrobe is built to your exact wall, ceiling and door swing, so no alcove space is wasted and nothing gets cut on site. Every panel is measured, cut and edge-banded in the workshop before it reaches your home.
Flat-pack gives you fixed widths that rarely fit a Dubai bedroom wall. Made-to-measure kids wardrobe joinery Dubai families keep for years gives you:
- Panels cut to your wall to the centimetre
- Adjustable shelves that move up as your child grows
- A hanging section sized for school uniforms, not adult coats
- Internal drawers, pull-out trays and a low book shelf
- Finishes matched to beds, doors and skirting
- Anti-tip brackets fixed into the wall, not the floor
If you are planning the whole room, the kids joinery Dubai: the complete 2026 guide shows how wardrobes, beds and study units are priced together. You can also see our kids joinery projects in Dubai before you commit.
Custom kids wardrobe cost in Dubai
Price follows size, board and hardware, not brand names. A small 1.2m reach-in unit starts at AED 2,800, a full-height 2.4m wardrobe runs AED 5,500 to 9,000, and an L-shaped corner run of 3m or more lands between AED 11,000 and 18,000.
| Size | AED price band | Typical use |
|---|---|---|
| Small reach-in, 1.2m | From 2,800 | JVC studio and one bedroom alcoves |
| Full height, 2.4m | 5,500 to 9,000 | Standard apartment and villa bedrooms |
| L-shaped corner, 3m and above | 11,000 to 18,000 | Palm Jumeirah villa rooms with high ceilings |
A quote breaks into four parts:
- Board and carcass, 45 to 55 percent of the total
- Doors and fronts, 20 to 25 percent
- Hardware such as soft-close hinges, runners, handles and locks, 10 to 15 percent
- Labour, transport and installation, 15 to 20 percent
Worked example. A full-height 2.4m wardrobe in a JVC two bedroom apartment, plywood carcass, laminate doors, soft-close hinges and one internal drawer bank, usually lands near AED 6,400 including installation. The same footprint on Palm Jumeirah, with a 3.2m ceiling, a top box to close the gap and a lacquer finish, sits closer to AED 9,000. To fix your number, request a custom kids wardrobe quote in Dubai.
Munawwar Ali Khan left this review after a full home fit-out:
I would like to share my very positive experience with Noor Al Sundus Contracting following the completion of a major renovation and fit-out of our home. Munawwar Ali Khan, 5 stars
Child-safety essentials parents must check
Safety is not a premium extra. A child safe wardrobe Dubai parents can trust has five things built in from the first panel.
- Anti-tip anchoring into masonry or studs, at least two fixing points per tall unit
- Soft-close hinges and drawer runners rated for 50,000 cycles or more
- Rounded or chamfered edges on every door and shelf front
- No gap measuring between 8mm and 25mm at the base or between doors, because that is where fingers get trapped
- Low-VOC E0 or E1 boards with water-based lacquer, important in small bedrooms with little airflow
- Ventilated back panels so damp air cannot sit against the wall
custom kids wardrobe Dubai joinery" loading="lazy" decoding="async" /> A finished office fit-out with glass partitions, built by the same in-house team behind our kids joinery in Dubai.
Sizing for Dubai layouts: apartment alcoves and villa bedrooms
Measure the alcove, the ceiling height and the air conditioning point before you choose a size. Dubai bedrooms follow two patterns and they need different wardrobes.
Apartment alcoves
Most bedrooms in JVC and across Dubai give you an alcove of 1.2m to 1.8m with a ceiling of 2.6m to 2.8m. The built in kids wardrobe Dubai residents choose for this space is usually full height, with hinged doors if you have 600mm to 700mm of swing room and sliders if you do not.
Villa bedrooms
Palm Jumeirah villa bedrooms often run to ceilings of 3.0m to 3.6m, so a full-height unit needs a top box or crown to close the gap above. Keep at least 150mm clear below split AC units, otherwise airflow drops and the room gets stuffy in August.
Built-in beats freestanding in both cases. Freestanding units leave dust gaps, tip when a child climbs the drawers, and rarely reach the ceiling.
Materials that survive Dubai summers
Plywood is the better core for Dubai. Summer humidity and 45C afternoons swell particle board and loosen hardware, so board type and edge banding matter more than door colour.
- Plywood core: holds bracket and runner screws, resists swelling, adds 15 to 25 percent to carcass cost
- Moisture-resistant MDF: cheaper, fine for dry bedrooms if every cut edge is fully sealed
- Edge banding: 2mm PVC, not 0.4mm paper, because thick banding survives knocks and humidity
- Finish: laminate for easy cleaning, water-based lacquer for a softer premium look
- Backs: ventilated panels rather than solid sheets pressed flat to the wall
Workstations, glass doors and city views in a completed office interior, delivered alongside our custom kids wardrobe projects.
If you want the wider room plan, kids bedroom joinery Dubai: cost, safety and design covers wardrobe, bed and desk combinations in one place.
Timeline and process in Dubai
Allow three to four weeks from site measure to finished wardrobe, with one day on site for installation.
- Site measure. We check the wall, ceiling, skirting, door swing and AC points, usually within a few days of your call.
- 3D design and approval. You see the layout, internal shelf heights and finish, then approve a fixed price before anything is cut.
- Deposit and material order. Board, hinges, runners and handles are ordered to the approved specification.
- Fabrication, two to three weeks. Cutting, edge banding, drilling and pre-assembly in the workshop.
- Installation, one day. Panels arrive finished, the unit is levelled and anchored to the wall.
- Snagging and handover. Doors aligned, drawers glided, edges checked, then a short care note.
We work as a DET-licensed contractor and use Dubai Municipality-compliant materials, so villa management and building approvals rarely slow the job down.
Their team was professional, responsive, and cooperative throughout the project. anil kumar, 5 stars
Design ideas that grow with your child
Good kids joinery should still work when a seven year old becomes a teenager. Start with adjustable internals and leave room to change the rest.
- Set the first hanging rail at 1.2m and add a second rail later
- Split a shared room with two mirrored units around a central study column
- Build a 1m desk return into the wardrobe run for homework years
- Add loft storage above a doorway-height wardrobe in villas
- Keep drawers low for ages three to seven, raise rails for ages eight and up
- Use handle-free push latches at toddler height
Frequently asked questions
How much does a custom kids wardrobe cost in Dubai?
Small 1.2m reach-in units start at AED 2,800. A full-height 2.4m wardrobe usually costs AED 5,500 to 9,000, and an L-shaped corner run of 3m or more costs AED 11,000 to 18,000. The price includes board, hardware, delivery and installation, so ask for the itemised breakdown before you compare quotes.
Is MDF or plywood better for a kids wardrobe in Dubai humidity?
Plywood is the safer choice in Dubai. It holds anti-tip bracket screws and drawer runners better and resists swelling through humid summers. Moisture-resistant MDF works in a dry, air-conditioned bedroom as long as every cut edge is sealed with 2mm PVC banding.
How long does a custom kids wardrobe take to make?
Plan three to four weeks from site measure to installation. Fabrication takes two to three weeks in the workshop and fitting takes one day. During busy periods on Palm Jumeirah and in villa communities, add a week for building access approvals.
Are custom wardrobes safe for toddlers?
Yes, when the unit is anchored to the wall at two or more points, hinges are soft-close, edges are rounded, and there is no finger-width gap between 8mm and 25mm. Ask for low-VOC E0 or E1 boards and water-based finishes for small bedrooms.
Can I match a custom kids wardrobe to the existing room?
Yes. Share photos of the bed, door and skirting, or send a drawer front for colour matching. We match laminate and lacquer finishes, edge banding colour and handle profiles so the new unit looks like it was always there.
Do you deliver custom kids wardrobes outside Dubai?
We only serve Dubai. Our work covers Palm Jumeirah, JVC and the rest of Dubai, and we do not take projects outside the emirate, which keeps site visits and after-sales visits quick.
