Custom kids furniture Dubai: 2026 bespoke joinery guide
Custom kids furniture in Dubai is joinery measured for your child's room, built in a workshop and finished in a colour you choose. Here is what a kids-joinery-only studio builds, what each piece costs in AED, and how long the job takes from first visit to install.
Why work with Noor al Sundus
- Kids-joinery-only studio, no general furniture lines
- In-house production and fitting team, not subcontracted crews
- Google rating of 5 from 8 reviews
- Completed work in Palm Jumeirah and JVC
- Fixed written quotation before production starts
- Direct WhatsApp line on +971 55 379 6441
Why custom kids furniture beats flat-pack in Dubai homes
The first reason is fit. Dubai rooms are rarely standard. A 3m by 3.5m bedroom in JVC, or a Palm Jumeirah apartment room with a column and an inward-opening window, leaves gaps that fixed modules cannot fill. Custom joinery runs the full wall, floor to ceiling, so you gain storage without giving up play space.
The second is humidity. Cheap particleboard swells at the edges once condensation or a spilled drink reaches the core, and after that doors drag and drawers stick. Moisture-sealed board and marine-grade ply hold their shape for years longer.
| Point | Flat-pack | Custom kids joinery |
|---|---|---|
| Dimensions | Fixed 60, 90 and 120 cm modules | Built to the millimetre |
| Core board | Particleboard with foil | Marine-grade ply or moisture-sealed MDF |
| Wall fixing | Straps, often left off | Anti-tip brackets into masonry or studs |
| Expected life in Dubai | 3 to 5 years | 10 to 15 years |
| Spend per piece | AED 1,500 to 4,000 | AED 2,500 to 14,000 |
The pieces we build
We make six things for kids rooms and almost nothing else, which is why the details land right: bed heights for a six year old, drawer pulls small hands can reach, shelf depths for picture books. All of it sits under our custom kids joinery services, from measuring to final snag.
Beds, bunk beds and loft beds
A loft bed is the biggest space win in a Dubai apartment. Set the mattress at 1.1m to 1.4m and the floor underneath becomes a desk, a reading nook or a wardrobe. Bunks suit siblings sharing when the ceiling gives at least 2.4m of clear height.
Wardrobes and reach-in storage
Full-height units with a rail low enough for a seven year old, a second rail above, and drawers for school uniforms. This is the piece parents ask about first, and it has its own guide on custom kids wardrobe Dubai.
Study desks and study nooks
Desks sized for the child now, with leg space you can raise later by moving the top. Cable cutouts, a laptop drawer, and a shelf at eye level for the school timetable.
Bookshelves
Wall-hung shelves with rounded fronts in 200mm to 300mm depths, anchored into studs. Low runs at 400mm to 600mm so a four year old can reach their own books.
Playroom units
Bench seating with lift-up storage, toy bins on soft-close runners and low open shelving. More detail sits in our guide to kids playroom joinery in Dubai.
Materials, finishes and child-safe standards
Our standard quote uses marine-grade plywood for structure, moisture-resistant MDF for painted doors and water-based low-VOC lacquer. Board is E1 rated at minimum, every edge is sealed on all six faces, and plinths are painted underneath, which is where moisture creeps in during a Dubai summer.
Safety details we build in as standard:
- Rounded edges with a 2mm to 3mm radius on exposed corners
- Soft-close runners and hinges so fingers cannot get caught
- Anti-tip wall brackets fixed into masonry or metal studs, never plasterboard alone
- Guard rails on upper bunks at least 260mm above the mattress, per EN 747
- Cot and toddler bed dimensions following EN 716
- No gaps between 8mm and 25mm where a small limb could jam
What custom kids furniture costs in Dubai
These are 2026 bands for supply, fitting and finishing.
- Single kids wardrobe, 1.8m wide: AED 4,500 to 9,000
- Bunk bed with ladder and guard rail: AED 6,500 to 14,000
- Loft bed with desk or drawers below: AED 7,500 to 16,000
- Study desk with drawer and cable port: AED 2,500 to 6,000
- Wall-hung bookshelf: AED 1,800 to 5,500
- Playroom bench and storage unit: AED 6,000 to 18,000
- Full kids room joinery, bed, wardrobe, desk and shelves: AED 15,000 to 45,000
A worked example. A 12 sqm room in a Palm Jumeirah apartment with a 2.8m ceiling usually takes a loft bed with stairs and drawers, one two-door wardrobe and a 1.2m desk. Budget AED 22,000 to 28,000. A larger 18 sqm room in a JVC villa with a bunk, two wardrobes and a playroom unit lands between AED 30,000 and AED 40,000.
What moves the number:
- Finish. Sprayed lacquer in a custom colour adds 15 to 25 percent over standard laminate.
- Internals. Drawers, soft-close runners and LED strips are priced per unit.
- Shape. Curves, house-shaped frames and themed panels take more workshop hours.
- Access. Tower jobs on Palm Jumeirah need lift protection, a booked lift slot and sometimes a refundable building deposit.
I would like to share my very positive experience with Noor Al Sundus Contracting following the completion of a major renovation and fit-out of our home. Munawwar Ali Khan, 5/5
Joinery and fit-out run under one project manager, so site works stay clean and on programme.
From measure to install: timeline and permits
Plan on 3 to 5 weeks from the first site visit to a finished room. Production takes 2 to 3 weeks once drawings are signed off.
- Site measure and design talk, 60 to 90 minutes. We check ceiling height, window and door swing, power points and skirting.
- Written quotation with per-piece pricing, usually within 48 hours.
- CAD drawings and material and colour selection, approved before anything is cut.
- Deposit paid, production starts in the workshop.
- Delivery and installation, normally one to three days for a full room.
- Snagging walk-through, with a 12 month workmanship warranty on fitting.
Permits depend on where you live. Villas in JVC normally need none for internal joinery. Apartments on Palm Jumeirah need a landlord NOC and building management approval before a fitter carries a panel through the lobby, plus lift protection. If sockets or plumbing move, the developer or Dubai Municipality may need to approve the drawing. Our contracting licence and DET registration cover the work, and we handle the building paperwork. If your building is unclear, book a free kids-joinery design consultation in Dubai and we will map it out for you.
A finished open-plan fit-out with partitions, workstations and breakout zones delivered on schedule.
How to choose a kids-joinery specialist in Dubai
Ask these questions before you pay a deposit.
- Do you build only kids furniture, or is this a side line?
- What board is in the core, and is it E1 rated?
- Is the lacquer water based and low VOC?
- How do you anchor tall units to the wall?
- Are anti-tip brackets and soft-close runners included or extra?
- Can I see your workshop and one finished kids room?
- Is the quotation fixed, and what is the payment schedule?
- What warranty covers fitting and hardware?
- Who handles the building permit and the lift booking?
The Google rating for Noor al Sundus sits at 5 from 8 reviews, and the same two themes come up: joinery quality and a team that keeps to schedule.
Frequently asked questions
How much does custom kids furniture cost in Dubai?
A single kids wardrobe runs AED 4,500 to 9,000 and a bunk bed AED 6,500 to 14,000. A full kids room with a bed, wardrobe, desk and shelves lands between AED 15,000 and AED 45,000 depending on size, finish and internals. Those figures include supply, fitting and finishing.
How long does bespoke kids furniture take to make and install?
Allow 3 to 5 weeks from the site measure to a finished room. Approved drawings and a deposit start production, which takes 2 to 3 weeks, and installation for a full room takes one to three days.
Is custom kids joinery safe for toddlers?
Yes, when it is built to the right standards. We round every exposed edge, fit soft-close runners, anchor tall units with anti-tip brackets into masonry or studs, and build bunks with guard rails at least 260mm above the mattress under EN 747. Cots follow EN 716 and all lacquer is water based with low VOC.
Do I need a permit to install kids joinery in a Dubai apartment?
In most Palm Jumeirah towers you need a landlord NOC and building management approval, plus a booked lift slot and lift protection. Villas in JVC usually need no permit for internal joinery. If the job moves sockets or plumbing, the developer or Dubai Municipality may need to approve the drawing.
Can you match new kids furniture to a bed or wardrobe we already own?
Yes. Bring a door, a drawer front or a clear photo and we match the colour in laminate or sprayed lacquer. Matching an existing profile is easier than matching a colour, so send both if you can.
Do you build loft beds for rooms with low ceilings?
Yes, and we measure floor to ceiling on site first. A loft with usable space underneath needs about 2.4m of clear height, which most Dubai apartments at 2.7m to 3m provide. Lower rooms are better served by a mid-height bed or a bunk.
