Kids bunk bed Dubai: custom joinery costs and safety
A custom kids bunk bed in Dubai costs between AED 4,500 and AED 24,000 before VAT, depending on size, material and how many beds you stack. Noor al Sundus builds bunk beds as joinery only, so the frame, the drawer staircase and the wardrobe beside it come from one workshop and one set of site measurements.
Why work with Noor al Sundus
- Kids joinery only, no general contracting
- Google rating 5.0 from 8 reviews
- Free site survey and fixed written quotation
- DET-licensed Dubai workshop
- Premium finishes in MDF, marine ply and solid wood accents
- Projects completed in Palm Jumeirah, JVC and across Dubai
Why custom bunk beds beat flat-pack in Dubai apartments and villas
Flat-pack bunks are made to a fixed length and width, and they have to fit whatever wall you own. Dubai rooms rarely cooperate. A kids room in a Palm Jumeirah villa often has a duct box in one corner, and the standard 200cm frame ends up blocking the only wardrobe wall. In a JVC apartment tower the second bedroom can be 2.8m by 3.2m, which is smaller than most imported bunks once you add a ladder and somewhere to stand.
Custom joinery fixes three things at once.
- Ceiling height. Dubai apartments run 2.7m to 2.9m and villas go past 3.2m. A loft style bunk uses that height, while a shop-bought frame stops at 1.8m and wastes the space above it.
- Awkward corners. L-shaped and angled runs follow the wall instead of leaving a 400mm dead gap behind the headboard.
- Small rooms. When floor space is tight, bunk, wardrobe and desk have to be one measured unit rather than three separate purchases.
Everything is cut from the survey, so the frame sits on the skirting line, clears the window reveal and leaves the door swing free.
kids bunk bed Dubai joinery" loading="lazy" decoding="async" />
Herringbone floor and flush doors mid renovation. The same measured detailing goes into every kids bunk bed in Dubai we build.
Bunk bed styles we build
Five layouts cover almost every quotation we write.
- Single over single. The standard sibling setup, 90cm mattresses, guard rail up top, two deep drawers underneath.
- Double over double. Two full size beds stacked, for older kids or a guest room that doubles as a kids room.
- L-shaped corner bunk. Two beds at 90 degrees with a storage tower in the dead angle.
- Triple bunk with a storage staircase. Three sleeping places, and the staircase becomes four drawers. Popular in JVC three bedroom apartments.
- Loft style with a desk underneath. One raised bed at 1.5m with a study desk, shelving and wardrobe below.
Choosing between a bunk and a single raised bed comes down to room shape and how many children share the space. Our kids loft bed joinery in Dubai guide compares both layouts room by room.
What a custom kids bunk bed costs in Dubai
The figures below are for the joinery itself, measured on site, delivered and installed. The survey and the 3D drawing are free.
| Configuration | Typical range | Core material |
|---|---|---|
| Single over single, two drawers | AED 4,500 to 7,500 | MDF with laminate finish |
| Double over double | AED 8,000 to 14,000 | Marine ply carcass, laminate or veneer face |
| Bunk with drawer staircase | AED 8,000 to 14,000 | Marine ply with soft close hardware |
| Triple bunk with storage stairs and wardrobe run | AED 15,000 to 24,000 | Marine ply with solid wood accents |
Add 5% VAT to all of the above. Two things move the price. Marine ply and solid wood accents add roughly 20 to 30 per cent over MDF and laminate. And accessorising, because a drawer staircase on 60kg rated runners costs more than a fixed ladder.
A worked example. A single over single bunk in MDF with a laminate finish, plus a two door wardrobe in the same run, lands around AED 9,000 to 11,000 before VAT in a JVC apartment. The same bunk with veneer, a curved corner detail and integrated reading lights is closer to AED 16,000 in a Palm Jumeirah villa. You can see our kids joinery projects in Dubai to compare finish levels before you commit.
A completed commercial fit-out in Dubai. The same workshop and finishing team produces our kids bunk beds.
Safety: what a child safe bunk bed in Dubai must include
We build to EN 747 and BS 8509, the European and British bunk bed standards, because the UAE has no separate bunk bed spec. These points are fixed in our workshop.
- Guard rail at least 260mm above the mattress, measured with the mattress in place, on every open side.
- No reachable gap between 6mm and 25mm, so fingers and limbs cannot wedge.
- Load rating of 100kg or more per bunk, tested on the frame rather than the slats alone.
- Concealed fixings and capped screw heads, nothing sharp at knee height.
- Soft close runners on every drawer and a slow close ladder option.
- Anti-tip anchoring into the wall behind the bunk, not into plasterboard alone.
- Low VOC water based finishes, fully cured before installation, because kids rooms are small and ventilation is limited.
The same material rules apply across our work, and you can read more on child-safe joinery materials and finishes.
Highly Recommended – Trustworthy, Hardworking & Complete Fit-Out Team Munawwar Ali Khan, 5 stars on Google
Space planning for a Dubai kids room
Most kids rooms we survey are 3m by 3.5m, and one layout works in almost all of them. Run the bunk along the long wall, keep 900mm of clear circulation in front of it, and pull the wardrobe and desk into the same joinery package.
- Bunk takes 2m of the 3.5m wall, leaving 1.5m for a wardrobe run.
- Head of the top bunk stays away from the window so the guard rail does not block light.
- Desk sits at 750mm under a loft bunk rather than beside it.
- Storage goes in the stairs, under the lower bunk and above the top rail.
When a wardrobe and a bunk share a run, the 600mm wardrobe depth sets the front line and the bunk is built out from it, so the two pieces read as one wall of furniture.
The quality of the fit-out and joinery work was very good, and they paid attention to our requirements anil kumar, 5 stars on Google
How long a custom kids bunk bed takes in Dubai
Plan for three to four weeks from survey to handover.
- Free site survey. We measure the room, ceiling height, window position, skirting, power points and door swing. Forty five to sixty minutes.
- 3D design and quotation. Three to five working days, with a rendered layout, material list and fixed price.
- Production. Ten to fourteen working days in our DET-licensed Dubai workshop, including finishing and curing time.
- Installation. One to two days on site, with anchoring, levelling, soft close hardware and clean up.
The two usual delays are drawing changes after production starts, and building access rules such as tower delivery permits or weekend work restrictions in villa communities. If you want a firm date, request a free kids room survey in Dubai and we will confirm the slot before you commit.
Frequently asked questions
How much does a kids bunk bed cost in Dubai?
A single over single bunk in MDF with a laminate finish starts at AED 4,500 and usually lands between AED 4,500 and 7,500 before VAT. Double over double and bunk plus drawer staircase builds run AED 8,000 to 14,000. A triple bunk with storage stairs and a wardrobe run is AED 15,000 to 24,000. Add 5% VAT, and remember the site survey and 3D design are free.
Do custom bunk beds in Dubai follow a safety standard?
There is no UAE-specific bunk bed standard, so we build to EN 747 and BS 8509. That means a guard rail at least 260mm above the mattress, no reachable gaps between 6mm and 25mm, a 100kg load rating per bunk and anti-tip anchoring into the wall. Finishes are low VOC and water based.
What is the best age for a bunk bed?
Most families move a child to the top bunk at around six years old, once they can climb up and get down without help. The lower bunk suits three years and up. We keep the top rail at 260mm above the mattress for younger children and can add a fold down ladder in tighter rooms.
Can a bunk bed be built into a wardrobe run?
Yes, and it is the layout we recommend for rooms under 12 square metres. The 600mm wardrobe depth sets the front line, the bunk is built out from it, and the staircase drawers sit between the two. It reads as one piece of furniture and removes the gap where dust and toys collect.
How long does a custom kids bunk bed take to build?
Plan for three to four weeks. The site survey takes under an hour, 3D design and quotation take three to five working days, production takes ten to fourteen working days and installation takes one to two days. Tower delivery permits or villa community work restrictions can add a few days.
